Black and Decker TV100 Manual De Instrucciones

386230/TV100 11/14/03 7:32 AM Page 1
INSTRUCTION
MANUAL
Cordless 2.4 Volt ScrewDriver
TV100
KEY INFORMATION YOU SHOULD KNOW:
•Charge tool for 12 hours before first use.
•Switch button must be depressed to operate tool in
either direction
•If bit does not fit into spindle, rotate bit and re-insert.
SAVE THIS
MANUAL FOR
FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL
PRODUCTO.
All manuals and user guides at all-guides.com
1-800-544-6986
1
WARNING: IMPORTANT SAFETY WARNINGS
AND INSTRUCTIONS
TO REDUCE RISK OF INJURY:
• Before any use, be sure everyone using this tool reads and understands all
safety instructions and other information contained in this manual.
• Save these instructions and review frequently prior to use and in instructing
others.
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce risk of fire, electric shock,
and personal injury, including the following.
READ ALL INSTRUCTIONS
GENERAL SAFETY WARNINGS AND INSTRUCTIONS
FOR ALL TOOLS
• KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
• CONSIDER WORK AREA ENVIRONMENT. Keep work area well lit. Don't use
portable electric tools near flammable liquids or in explosive atmospheres.
Motors in these tools spark, and might ignite fumes.
• KEEP CHILDREN AWAY. All visitors should be kept away from work area.
• STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high
or locked-up place — out of reach of children.
• DON'T FORCE TOOL. It will do the job better and safer at the rate for which it
was intended.
• USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy
duty tool.
• DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught
in moving parts.
• USE SAFETY GLASSES.
• DON'T OVERREACH. Keep proper footing and balance at all times.
• MAINTAIN TOOLS WITH CARE. Keep tools clean for better and safe
performance. Keep handles dry, clean, and free from oil and grease.
• LOCK OFF TOOLS when not in use, and before servicing.