Power Management - Corsair KATAR PRO Guia De Inicio Rapido

SETTING UP YOUR MOUSE USING 2.4GH
> Turn on your computer and connect the USB wireless receiver to an available USB port.
> Toggle the power / wireless mode switch to "2.4GHz" position to turn on your mouse.
> The multi-purpose LED indicator on your mouse will turn solid white when automatically connected.
> Download CORSAIR iCUE software from www.corsair.com/downloads.
> Run the installer program and follow instructions for installation.
SETTING UP YOUR MOUSE USING BLUETOOTH
> Turn on your Bluetooth 4.0 or higher enabled computer and initiate Bluetooth pairing mode on it.
> Hold the DPI CYCLE button and toggle power / wireless mode switch to BT position to turn on your mouse.
> The multi-purpose LED indicator will start blinking blue.
> The multi-purpose LED indicator on your mouse will turn solid blue when connected.
HOW TO PERFORM A FACTORY RESET
> Turn off the mouse by flipping the power switch to the OFF position.
> Press and hold the Left and Right buttons simultaneously.
> Turn on the device with either wireless mode.
WIRELESS
z
®
3
MULTI-PURPOSE LED INDICATOR
> Various aspects of mouse operation are communicated through the multi-purpose LED indicator located on
top of the mouse.
GAMING MODE
POWER
STATUS
POWER SAVING MODE
BATTERY CRITICAL. NEW BATTERY REPLACEMENT REQUIRED
BATTERY LOW
BATTERY
BATTERY MEDIUM
STATUS
BATTERY HIGH
BATTERY FULL
2.4GHz WIRELESS MODE – PAIRING
2.4GHz WIRELESS MODE – PAIRED
2.4GHz WIRELESS MODE – PAIRING FAILED
WIRELESS
STATUS
BT WIRELESS MODE – PAIRING
BT WIRELESS MODE – PAIRED
BT WIRELESS MODE – PAIRING FAILED
STAGE #1 – 800 DPI
DPI STAGE
STAGE #2 – 1500 DPI
STATUS
STAGE #3 – 3000 DPI
Initial LED indication sequence: When powering on the mouse, the LED indicator will flash 12 to 15 seconds to
indicate various statuses in the following order:
Power Status* > Battery Status > Wireless Status > DPI Stage
*Will only show when there is a mode change.

POWER MANAGEMENT

If power is low or battery life is a priority, please switch to Power Saving Mode for extended battery life.
Please download iCUE for full power management features.
Mode switching without iCUE: To enter Power Saving Mode, turn the power switch to OFF. Press and hold
the scroll wheel button and then slide the power switch to either 2.4GHz or Bluetooth, then release the scroll
wheel button.
Follow the same steps to switch back to Gaming Mode.
MULTI-PURPOSE
LED INDICATOR
BLINKING PURPLE
BLINKING YELLOW
PULSING RED
BLINKING RED
BLINKING AMBER
BLINKING GREEN
GREEN
BLINKING WHITE
WHITE
PULSING WHITE
BLINKING BLUE
BLUE
PULSING BLUE
RED
WHITE
GREEN
4
ENGLISH