Identification And After-Sales Service; After-Sales Service; Ordering Spare Parts; Identification And Servicing - Grillo 12000 Manual De Instrucciones

25) Always use original Grillo spare parts.
26) Before starting any work with the machine, check that all the safety systems of the machine are
in perfect working order. They must never be disabled or tampered with.
27) Before starting work, check that the nuts and bolts securing the tiller and hoes are perfectly tight.
28) All protective fittings (hoods, mudguards, etc.) must be kept in place during operation.
29) Never clean the tiller with the engine running.
30) Never use the machine barefoot.
31) Never change the engine settings, especially the maximum r.p.m.
32) Allow the engine to cool before placing the machine indoors.
33) CAUTION: to reduce the risk of fire, keep the engine, the exhaust pipe and the exhaust manifolds
free from grass, leaves, dust, etc...
34) If the petrol tank is to be emptied, this must take place outdoors.
35) Rotavator must be driven by one operator only.

AFTER-SALES SERVICE

This handbook provides instructions for use of the motor hoe and for correct basic servicing which the
user can carry out himself. For all procedures not described in this handbook, contact your local dealer.
SPARE PARTS
Always use original spare parts, as they are the only ones to offer complete safety and
interchangeability. Always state the serial number of the machine and the code number or the part to be
replaced when ordering. For engine parts, refer to the specific handbook.
GUARANTEE
The guarantee is given in compliance with the current law. The dealer will have to give the client a copy
of the registration card of the machine, which they will print up from the Grillo website.
For the engine the warranty provided by its manufacturer will be applied.

ORDERING SPARE PARTS

Always state the machine serial number and the code number of the part to be replaced.
Contact your local dealer. For further information, our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC) - ITALY
Tel. 0039 / 0547 / 633111 - Fax 0039 / 0547 / 632011
Web site: www.grillospa.it - E-mail:
THE FOLLOWING SPARE PARTS SHOULD ALWAYS BE KEPT TO HAND
– 1 gas cable
– 1 clutch cable
– 1 throttle lever
– 2 right tines with screws
– 2 left tines with screws
All manuals and user guides at all-guides.com
12000/ Translation of the original instructions

IDENTIFICATION AND AFTER-SALES SERVICE

grillo@grillospa.it
The rotavator is fitted with a nameplate on the
frame with the serial number of the machine. This
number must be stated when requesting service or
ordering spare parts.
5