Black and Decker LCSB2140 Manual De Instrucciones página 9

INSTAllING AND REmOVING THE
bATTERy pACk
WARNING:
Make certain the safety
key is removed to prevent actuation
before removing or installing battery.
TO INSTAll bATTERy pACk:
• Lift up on the battery compartment cover
(7) to expose the battery compartment
(24) as shown in figure 11.
• Slide the battery (25) into the battery
compartment until it is fully seated and
an audible click is heard as shown in
figure 12. Make sure battery pack
is fully seated and fully latched into
position.
• Close the battery compartment cover.
Ensure the cover is fully latched before
starting snow mover.
11
24
12
25
TO REmOVE bATTERy pACk:
• Open the battery compartment cover
(7) as described above.
• Depress the battery release button
located on the battery pack and pull
battery pack out of tool as shown in
figure 13.
13
All manuals and user guides at all-guides.com
OpERATION
READ THIS INSTRUCTION mANUAl
bEfORE OpERATING yOUR SNOW
mOVER. See "functional Description"
to familiarize yourself with the location of
various controls and adjustments. Save
this manual for future reference.
work at its own pace. Do not overload.
pOWERING ON AND Off
switch or bail handle in the ON position.
• Open the battery compartment cover
• Close the battery compartment cover.
• Insert safety key (3) into the key slot
• This snow mover is equipped with a
• To turn the snow mover off, simply release
9
WARNING:
Let the snow mover
WARNING:
Never attempt to lock a
and slide the battery into the battery
compartment until it is fully seated and
an audible click is heard (fig.12). Make
sure battery pack is fully seated and
fully latched into position.
Ensure the cover is fully latched before
starting snow mover.
(26) located on the switch housing
until it is fully seated inside housing as
shown in figure 14. The snow mover is
now operational.
special on-off switch box. To operate
the snow mover, push the safety switch
button (4) on the switch box (27), then
pull the ON/OFF switch bail handle (2) to
the handle bar as shown in figure 15.
the ON/OFF switch bail handle (2).
14
15
4
27
26
3
2