Temperature Adjustment - KENMORE ELITE W10168300A Manual De Uso Y Cuidado

Adjusting the Controls
To adjust the set points, press the TEMPERATURE button on the
dispenser panel. When adjust mode is activated, set points and
adjusting information will appear on the display screen.
NOTE: To view Celsius temperatures, press UNITS when adjust
mode is activated. To return the display setting to Fahrenheit,
press UNITS again.
Refrigerator Controls
When adjust mode is activated, the up and down arrows on the
display screen allow you to adjust the refrigerator compartment
temperature. The set point range for the refrigerator is 33°F to
45°F (0°C to 7°C).
Press the down arrow to lower the set point.
Press the up arrow to raise the set point.
Press SET to save your changed settings.
NOTE: The new settings will not be saved if you exit the
temperature screen without pressing SET.
Freezer Controls
When adjust mode is activated, the up and down arrows on the
display screen allow you to adjust the freezer compartment
temperature. The set point range for the freezer is -5°F to 5°F
(-21°C to -15°C).
Press the down arrow to lower the set point.
Press the up arrow to raise the set point.
Press SET to save your changed settings.
NOTE: The new settings will not be saved if you exit the
temperature screen without pressing SET.
CONDITION:
REFRIGERATOR too cold
REFRIGERATOR too warm
FREEZER too cold
FREEZER too warm/too little ice
Press BACK to exit adjust mode, or allow about 15 seconds of
inactivity and adjust mode will turn off automatically.
Additional Features
Accelerated Ice Production
The Accelerated Ice feature assists with temporary periods of
heavy ice usage by increasing ice production over a 24-hour
period.
On the display screen, press FEATURES, then
ACCELER-ICE. The display screen indicates whether the
feature is on or off.
ON
Press the ACCELER-ICE icon to turn on the feature.
The Accelerated Ice setting will remain on for 24 hours unless
manually turned off. (Press the icon again to manually turn off
the feature.) The display will continue to show your normal
temperature set point.
All manuals and user guides at all-guides.com
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR Setting
1° higher
REFRIGERATOR Setting
1° lower
FREEZER Setting
1° higher
FREEZER Setting
1° lower
OFF
NOTE: If increased ice production is desired at all times, change
the freezer control to a lower setting. Setting the freezer to a
colder temperature may make some foods, such as ice cream,
harder.
SmartSense™ Temperature Management
The SmartSense™ feature assists with regulating the
temperature inside the refrigerator and freezer. If a large quantity
of warm food is placed in the refrigerator or warm air enters the
refrigerator while the door is held open, SmartSense™ activates
to quickly restore the temperature to the set point.
NOTE: SmartSense™ is always on when your refrigerator is
operating. You do not need to press any buttons to activate it.
The SmartSense™ icon on the dispenser display screen
indicates that the feature is functioning properly.
Kitchen Timer
To assist with general kitchen activities, the controls include a
timer feature.
1. On the display screen, press FEATURES, then TIMER.
2. Use the up and down arrows to adjust the hours and minutes
as desired.
3. To start the timer countdown, press START. The timer will not
initiate if you exit the timer screen without pressing START.
NOTE: During the countdown, press MAXIMIZE to enlarge
the timer for easier visibility. When the display is maximized,
press anywhere on the screen to return to normal view.
When the timer is counting down, press PAUSE to pause
the countdown. Press START again to restart the
countdown.
To reset the timer to zero, press RESET at any time.
IMPORTANT: When using the timer, you can also use other
control and dispenser features. Press BACK twice, or press
the HOME button on the dispenser panel. The timer
countdown will be shown in the upper-left corner of the
display screen.
4. When the countdown reaches zero, the timer clock will blink
and a tone will sound, repeating every 30 seconds. Press
RESET to turn off the tone and reset the timer feature.
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the
refrigerator or freezer door is open for 5 minutes and the product
cooling is turned on. The alarm will repeat every 2 minutes.
Close both doors to turn it off. The feature then resets and will
reactivate when either door is left open again for 5 minutes.
If you need to keep the doors open and wish to silence the
alarm for up to 5 minutes, press SNOOZE on the display
screen.
If you need to keep the doors open and wish to silence the
alarm for longer than 5 minutes, press RESET on the display
screen. The alarm will remain off until both doors are closed,
then will reactivate when either door is left open again for
5 minutes.
Additional Settings
Time and Date
To change the time and date displayed, press FEATURES,
then SETTINGS, then TIME & DATE. Use the up and down
arrows to change the time, then press CHANGE DATE and
use the arrows to change the date. To save the new settings,
wait 15 seconds or press BACK.
11