Tula RING SLING Manual De Instrucciones página 8

PREPARING YOUR RING SLING – THREADING THE RINGS
PRÉPARER VOTRE ÉCHARPE À BOUCLE (SLING) : COMMENT ATTACHER LES ANNEAUX
CÓMO PREPARAR SU BANDOLERA CON ARGOLLA: ENSARTADO DE LAS ARGOLLAS
1. Hold the sling with the rings/shoulder in one hand and the tail end in the other, with the tag facing up. The fabric should not be twisted.
2. Gather the fabric of the tail and pass the tail through both rings. The tag should be sandwiched in between the tail and the shoulder of the sling.
3. Pass the tail back over the top ring and through the bottom ring. This is similar to threading a belt.
4. Spread the fabric across the rings to ensure that it is not twisted by pulling the rails away from one another to flatten the fabric as much as possible.
5. Holding the rings in one hand, pass the loop over your head. Your rings should end up on one shoulder {your choice), with the tail end hanging down
towards your feet in the front.
6. The best final placement for the rings should be just under your shoulder. It can be helpful to place them as high as possible when first learning to
wear a ring sling, as the rings will move down as you adjust the sling.
7. Check the length of the sling to ensure that it is suitable for your size. The lowest part of the sling pouch should be close to the same level as
your belly button.
1