Assembling The Sliding Rack Kit - Hotpoint Ariston FQ 103.1/HA Instrucciones De Uso

Assembling the sliding rack kit

To assemble the sliding racks:
A
Left
Right guide
guide rail
rail
B
C
D
4. Finally, fit the frames on the spacers A.
! Do not place the sliding racks in position 5.
1. Remove the two
frames, lifting them
away from the spacers
A ( see figure ).
2. Choose which shelf to
use with the sliding rack.
Paying attention to the
direction in which the
sliding rack is to be
extracted, position joint
B and then joint C on the
frame.
3. Secure the two frames
with the guide rails using
the holes provided on
the oven walls ( see
diagram ). The holes for
the left frame are
situated at the top, while
the holes for the right
frame are at the bottom.
GB
25