Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting Your Speakers
Always turn off your amplifier or receiver before making any connections.
I Preparing Your Speaker Cables
Carefully remove 10 mm (3/8 ")of insulation from both ends of your
speaker cables and twist the bare wires tightly, as shown.
I Hookup
NS-C125
Tighten
Loosen
–
Notes:
• Make sure that the bare wires are not touching each other as this could damage the speaker and amplifier.
• Connect one speaker to the left terminals of your amplifier, and another speaker to the right terminals, making
sure not to reverse the polarity (+, –). If one speaker is connected with reversed polarity, the sound will be
unnatural and lack bass.
I Using a Banana Plug
1. Remove the speaker terminal cover by
gently pulling it toward you.
2. Tighten the terminal knob.
3. Simply insert the banana plug into the
terminal.
All manuals and user guides at all-guides.com
+
10 mm
(3/8 ")
Good
FRONT
CENTER
OR
Amplifier or
SURROUND
R
L
receiver
+
–
NS-M125
Banana Plug
3
1
2
No Good
5
E-
Publicidad
Tabla de contenido
