Blunt/Envy Scooters ATS Pro El Manual Del Propietario página 7

fig. 1.3
Take out the inner aluminum ring by
⁰
turning it 90 (fig. 1.5) and pulling it out
and remove the inflatable tube. (fig. 1.6)
When the tube is changed, reassemble
the rim and securely tighten all 5 bolts,
then inflate to the recommended pres-
sures printed on the tyre .
*Repeat the process when inserting the
aluminum ring back into the tyre.
fig. 1.5
Warning: Injury may occur if you attempt to disassemble the wheel
All manuals and user guides at all-guides.com
Maintenance
Disassembling the rim and changing
the inflatable tube
WARNING: FULLY DEFLATE TYRE BE-
FORE UNDOING ANY BOLTS ON THE
RIM
When disassembling the rim, make sure the noz-
zle extends out of the rim and deflate the tire as
per instructions above. When fully deflated use
your Allen key to unscrew the 5 bolts in the rim.
(fig. 1.3). and (fig 1.4)
fig. 1.6
without deflating the tire.
7
fig. 1.4
Cleaning your scooter
Never use alcohol or any strong
cleaning agents to clean your
scooter. Doing so may damage
paint or fragile materials. Warm
water and a damp cloth should
be enough. Avoid putting water
directly on grip tape and never
submerge your scooter in water.