Gioteck FL300UNI-31-MU Manual Del Usuario página 4

To use the FL300 with devices that do not support Bluetooth®, you will
need to plug the provided 3.5mm audio cable into the headset port on
the left earcup and connect the other end of the cable into the 3.5mm
port on your controller / audio device. (Note: This also allows you to use
the headphones in places where wireless signals are restricted).
For specific setup instructions for your chosen device please refer to
the instructions below:
PLAYSTATION®4
Go to the settings screen on the PlayStation®4 following the menu
choices as listed. PS4 > Settings > Devices> Audio Devices > Output to
headphones > 'All Audio'. Input and Output Device should also be set
to 'Gioteck FL300'. Adjust Mic sensitivity and volume output settings to
desired levels.
XBOX ONE®
Go to 'Settings' > 'All Settings' >'Kinect & devices' > 'Devices &
accessories' and then select your controller and adjust your
audio options.
NOTE: Older Xbox One controllers without a 3.5mm headset port will
require the Microsoft® Stereo Headset Adapter (sold separately).
Please follow the instructions below to adjust the volume and chat/
audio mix when using the stereo adapter:
• Connect your headset to the Microsoft headset adapter using the
provided audio cable.
• Game/Chat Audio Mix: The two buttons on the left side of the
Microsoft headset adapter adjust the mix of game audio versus
chat audio. If you want more game volume than chat volume, press
the top button with the controller icon until you reach the level you
want. A tone will sound when you have reached the maximum level.
To increase the chat volume, press the bottom button with the head
5
All manuals and user guides at all-guides.com
symbol on the left side of the Microsoft headset adapter. Note: If you
don't want to hear the TV, simply turn down the volume on your TV.
(When a headset is plugged into the adapter on your controller, sound
from the TV is not automatically muted.)
• Mute: This button mutes your chat audio so other users can't hear
your voice. The orange LED will illuminate when you are muted.
• Volume: The volume up and down buttons (on the right) control all
audio coming to your headset, including game and chat audio. If you
don't want to increase both game and chat audio at the same rate,
adjust the game/chat audio balance.
CONNECTING PC / MAC
The headset should be automatically detected when connected.
Check the application settings that you want to use and select the
headset for use with that application.
6