Charging The Headphones - Gioteck FL300UNI-31-MU Manual Del Usuario

USING THE PORTABLE SPEAKERS
To use the External Speaker function, please follow this procedure;
1] Disconnect the fixed audio cable from the headband and both
of the earcups.
2] Remove the earcups from the headband by carefully pulling them
away from the Headband housing.
3] When the earcups are disconnected from the headband, use the
provided 3.5mm audio cable to connect the left and right earcup
speakers together through the fixed audio cable ports on the top
of the earcups.
4] To enable the External Speaker Mode, hold the multi-function
button for 2 Seconds. To change back to headphones mode hold
the multi-function button for 2 Seconds.
01
02
9
All manuals and user guides at all-guides.com
Audio Connector Jack for
Headphone/external Speaker
HOLD
04
03
3.5MM
Audio Cable

CHARGING THE HEADPHONES

1] To charge the Headphones, use the supplied USB cable and
insert into any powered USB Port. Normal charging process
takes 2-3 hours.
2] The red LED on the left Earcup will turn on when charging and
will turn off when charging is complete.
3] Make sure the battery has been fully charged and fully released
at the first three times of use to ensure the battery the best
performance. After charging is complete, please remove the
cable from the Headphones and the USB Cable from the USB port.
Do not keep the Headphones connected to the USB port for a long time
after charging complete as this will shorten the lifetime of the Battery.
10