WARNING! Disconnect the AC adapter from the
AC power supply and the balance
before cleaning.
WARNING! Do not allow liquids to enter the AC
adapter or the balance.
If the scale shows an error message, proceed as follows:
1. Turn the scale off and wait for approximately 5 seconds.
2. Turn the scale on.
3. If the error message is still displayed, refer to the error message list.
OPERATING ISSUE
E11
E16
E18
E34
No PLU
nnnnnn
uuuuuu
If the troubleshooting section does not resolve your problem, contact Uline Customer Service at 1-800-295-5510.
PAGE 13 OF 39
MAINTENANCE
TROUBLESHOOTING
CAUSES
RAM error.
ROM error.
EEPROM error.
PLU number too high.
PLU not found.
Overload
RAM error.
CLEANING
Use a soft cloth dampened with water and a mild
detergent.
NOTE: Do not use harsh chemicals to clean the
1-800-295-5510
uline.com
balance, as the finish may be
damaged.
RECOMMENDATIONS
Contact Uline service team.
Contact Uline service team.
Contact Uline service team.
Enter PLU Number from 1-99.
Store PLU.
Reduce load.
Re-zero the scale.
0721 IH-5116