Cleaning - Collexia cosmetic hair program E2601 Instrucciones De Uso

• Insert the holder into the cosmetic nozzle and
screw in a clockwise direction and lock into
place.
Always hold the cosmetic nozzle in a vertical position while you are
carrying out the steps described above to prevent the stick from
falling out of its holder in the nozzle.
Professional cosmetic product supplied in ready-for-use stick
Take a soaked stick from its blister pack using the enclosed tweezers.
Insert the soaked stick as described above.
• Position the cosmetic nozzle onto the fan
opening of the device. The hair dryer is now
ready for the cosmetic heat treatment.
The quantity of cosmetic formula diffused on the hair can be
regulated according to the drying time, temperature level and the
air fl ow. The maximum quantity of cosmetic diffused on hair can be
obtained with the hairdryer set at the maximum temperature (setting
2) and maximum air fl ow (setting 3).
One stick can be used for a 15/20 minute drying operation. The
conditioning effect increases with the drying time and is reached
after about 10/12 minutes on average.
Please follow the instructions provided on the boxes containing the
Collexia Professional cosmetic products.
All manuals and user guides at all-guides.com

CLEANING

Never immerse the device in water or other fl uids.
Before using the device again, make certain that all humid parts
are completely dry!
Cleaning the device and accessories
When necessary clean the device and the accessories using a moist
cloth. Do not use solvents or aggressive detergents for this purpose.
This could damage surface areas.
Check and inspect the suction opening of the device on a regular
basis and remove any accumulated dust and hair.
Cleaning the cosmetic nozzle
Clean the cosmetic nozzle with lukewarm water prior to inserting a
fi lter with another cosmetic product. Anyway rinse well the cosmetic
nozzle at least once a day.
Cleaning the suction fi lter
When the suction fi lter (4) starts to get clogged,
the colour of the suction fi lter grid will change
colour, from black to white, which indicates an
accumulation of dust. The suction fi lter should
be regularly cleaned in the presence of dirt, hair
and dust to avoid them from entering inside the
hairdryer.
To clean the fi lter, follow these steps:
• unscrew the fi lter (a) in an anti-clockwise direction as far as it will
go and remove it.
ATTENTION: Before cleaning the device, switch it off
and pull the power plug from the socket!
11