Whip Mix Verimodel OS Instrucciones página 3

To achieve the maximum mechanical strength, post cure in a light curing unit, such as
Asiga's Flash from Whip Mix. Follow manufacturer's instructions.
Look for cured debris in the tray after each print job, especially after a
print failure. A paint strainer can be used to filter out any debris. Printing
with cured debris could potentially cause damage to the tray or distort the
printed objects.
Deviations from the described manufacturing process may lead to different mechanical
and optical properties of the VeriModel™ OS material.
WORKING WITH PRINTED MODELS
Models can be coated with a separating material such as Whip Mix's Foilcote, Lubritex
No. 12, or Gator Die Lube to prevent wax from adhering.
Models can be duplicated with silicone.
When models are used to create orthodontic appliances, or denture bases, a non-food
grade silicone mold release agent should be used to prevent acrylic from adhering to the
surface of the model.
Models can be used with vacuum form method to create aligners, retainers, and indirect
bonding trays.
Danger!
Contains Acrylate, Phosphine Oxides and Methacrylic
monomer.
May cause an allergic skin reaction.
Causes serious eye irritation.
Suspected of damaging fertility.
Harmful to aquatic life with long lasting effects.
Precautionary statements:
Obtain special instructions before use.
Do not handle until all safety precautions have been read
and understood.
Avoid breathing mists, vapors or spray.
Wash thoroughly after handling.
Contaminated work clothing must not be allowed out of
the workplace.
86°F
30°C
68°F
30°C
Avoid release to the environment.
Wear protective gloves and eye protection.
IF exposed or concerned: Get medical attention.
IF ON SKIN: Wash with plenty of soap and water.
If skin irritation or rash occurs: Get medical attention.
Take off contaminated clothing and wash it before reuse.
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do.
Continue rinsing.
Immediately call a POISON CENTER or doctor.
If eye irritation persists: Get medical attention.
Collect spillage.
Store locked up.
Dispose of contents and container in accordance with local
and national regulations.
ENGLISH