Saving Broadcast Tv Channels In The Memory (Channel Search) - Sharp LL-M15X1U Manual De Funcionamiento

All manuals and user guides at all-guides.com
Saving broadcast TV channels in the
memory (CHANNEL SEARCH)
"CHANNEL SEARCH" allows you to search
through available channels ("AIR" or "CABLE") in
your area.
The tuner saves them to TV memory automatically.
INPUT
MENU
BRIGHT
/
ENTER
MODE
CH
VOL/BRIGHT
MAIN
POWER
1. Turn on the monitor power.
2. Select the TV mode using the INPUT button
(monitor) or the TV button (remote control).
3. Display the MENU screen using the MENU
button.
MENU
VIDEO ADJUST
CHANNEL SETTING
MODE SELECT
CLOSED CAPTION
V-CHIP BLOCK
4. Select "CHANNEL SETTING" using the MENU
button (monitor) or the
control), and press the ENTER/BRIGHT MODE
button (monitor) or the ENTER button (remote
control).
CHANNEL SETTING
RETURN
[ AIR ]
AIR/CABLE
CHANNEL SEARCH
CHANNEL MEMORY
Setting TV channels
5. Select "CHANNEL SEARCH" using the MENU
button (monitor) or the
control), and press the ENTER/BRIGHT MODE
button (monitor) or the ENTER button (remote
control).
CHANNEL SEARCH
POWER
PC TV AV
SLEEP MENU
6. Press the ENTER/BRIGHT MODE button
(monitor) or the ENTER button (remote control).
ENTER
The tuner will search through all available
BRIGHT
BRIGHT
MODE
channels in your area and save them to the TV
memory.
DISPLAY CC MTS MUTE
Note:
- To interrupt Channel Search, press the INPUT
VOL
button (monitor) or the MENU button (remote
control). Channel Search will stop at the current
CH channel and will not save any higher channels.
FLASHBACK
7. When Channel Search completes, the MENU
screen becomes off and TV screen becomes
minimum channel of TV memory.
If TV memory is empty, TV channel will be CH 2.
Notes:
- Searching channels are:
< >
TV/AV
AIR channels:
>>
VHF: 2 through 13
>>
UHF: 14 through 69
>>
CABLE channels:
>>
1 (HRC and IRC mode only)
>>
2 through 125 (STD, HRC and IRC)
- During Channel Search, the monitor will change
channels automatically.
- When Channel Search completes, all channels,
buttons (remote
which were set previously, will be erased.
- If you search for channels but cannot receive
any, TV memory becomes empty.
< >
TV/AV
>>
>>
E23
buttons (remote
2
AIR
< >
TV/AV