Publicidad
Idiomas disponibles
Idiomas disponibles
If, for any reason, a fault occurs within the pump, it is recommended that the equipment be
returned to an appointed agent.
5. General Specification
INFORMATION
bright nickel plated brass, anodized aluminum, phosphor bronze, nitrile
rubber seals and nylon.
Item
Pneumatic Pressure Range
Vacuum Pressure Range
Relief Valve
Dimensions (Length x Width x Depth)
Weight (approximate)
a. This value assumes atmospheric pressure at 1 bar (14.5 psi) and varies depending on atmospheric pressure.
6. Returned Goods Procedure
If the unit requires calibration or is unserviceable, return it to the nearest GE Service Centre
listed at: www.gemeasurement.com
Contact the Service Department to obtain a Return Authorization (Worldwide excluding USA).
In the USA, obtain a Return Material Authorization [RMA].
Provide the following information on either a RGA or RMA:
• Product (i.e. PV 210)
• Serial number
• Details of defect/work to be undertaken
• Operating conditions
6.1 Safety Precautions
INFORMATION
and may not guarantee further performance.
You must inform GE if the product has been in contact with any hazardous or toxic substance.
The relevant COSHH or in the USA, MSDS, references and precautions to be taken when
handling.
6 | PV 210 Instruction Manual-English
All manuals and user guides at all-guides.com
Pneumatic gases must be compatible with stainless steel,
Specification
0 to 3 bar (0 to 45 psi)
a
0 to -0.9 bar
Adjustable from 50 mbar (20 inH
150 mm (6.7") x 46 mm (1.8") x 46 mm (1.8")
0.6 kg (1.3 lb)
Service by unauthorized sources will affect the warranty
a
(0 to -27 inHg)
O) to maximum pressure.
2
© 2005 Baker Hughes, a GE company – All rights reserved.
Publicidad
