Product Familiarisation - Silverline 806719 Manual De Usuario

Ocultar thumbs

Contenido

página de 29

/ 29
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

806719

Power Tool Use & Care

a) Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed

b) Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be repaired

c) Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the power

tool accidentally

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool's

operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control

g) Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could

result in a hazardous situation

WARNING: When used in Australia or New Zealand, it is recommended that this tool

is ALWAYS supplied via Residual Current Device (RCD) with a rated residual current

of 30mA or less.

Service

a) Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained

Wet & Dry Vacuum Safety

WARNING: ALWAYS disconnect from the power supply before opening the unit, cleaning,

carrying out maintenance, or when the unit is not in use.

a) NEVER pull on the power cable to remove the plug from the power point. This

could cause damage to the power cable, the vacuum cleaner and the power point.

b) DO NOT allow the vacuum to pass over the power cable. This could cause

damage to the internal wires.

c) DO NOT vacuum the following items:

• burning matches

• glowing ashes

• cigarette ends

• flammable

• corrosives

• combustible or explosive substances

d) Use this product only for the purposes for which it is intended. Other

applications may be dangerous, and lead to serious injury and/or property damage.

e) Take great care when cleaning stairs. Ensure the vacuum is placed on a secure,

lower level, to avoid the danger of the vacuum falling on to the user.

f) Use ONLY genuine Silverline consumables, attachments and spare parts

30Ltr Wet & Dry Vacuum Cleaner