Publicidad
APPLICATION
The SURTEK Series Chain Block is a portable
lifting device easily operated by hand chain.
It is suitable for use in factories, mines, farms,
construction sites, wharves, docks and warehou-
ses for installation of equipment, as well as for
loading and unloading goods. It is specially ad-
vantageous for lifting work in the open air and
places where no power supply is available.
The chain block can be attached to a trolley of
any type as a traveling chain block. It is suitable
to monorail overhead conveying system, hand
traveling crane and jib crane.
INSTRUCCIONES DE OPERACIÓN
Do not operate with kinked or twisted chain.
Do not use two or more hoists to lift one weight.
In case the hand chain pull force exceeds the
normal. Do not pull by in increasing force. Stop
operation immediately and inspect the hoist.
No overlifting. No overlowering.
No hook tip loading. No direct binding of a load
with a load chain.
TABLA DE ESPECIFICACIONES
CÓDIGO
CAPACIDAD
(ton)
1/2 t
POLAC1L
1 t
POLAC2L
POLAC3L
2 t
POLAC4L
3 t
CÓDIGO
DIMENSIONES
(ton)
A: 142 mm
POLAC1L
B: 126 mm
C: 18 mm
POLAC2L
A: 142 mm
B: 126 mm
C: 22 mm
A: 142 mm
POLAC3L
B: 126 mm
C: 28 mm
POLAC4L
A: 178 mm
B: 142 mm
C: 34 mm
LEVANTE
PRUEBA DE
CARGA
(m)
(ton)
2,5 m
0,75 t
9,5 kg
2,5 m
1,5 t
10,5 kg
2,5 m
3 t
14,5 kg
3 m
4,5 t
24,8 kg
C
1/2 t - 1 t
E S P A Ñ O L •
Keep anybody out of the place under the loa-
ding.
MAINTENANCE
1. Clean off the dirt on the chain block after use
and store it in a dry place to keep it from getting
rusty and corrosive.
2. Clean the parts with kerosene and smear the
gears and bearings with grease once a year by
a skilled hand.
3. Never allow any layman to disassemble the
block.
4. After cleaning and repairing the block should
be subjected to no-load test and heavy load test.
A chain block can be put into operation after it
has been tested and found in good condition.
5. Keep clean the friction surfaces of the brake
while lubricating or operating the block brake
mechanism should be inspected regularly for
prevention of faulty braking and falling of the
load.
PESO
ESPACIO
LIBRE DE
(kg)
GANCHO A
GANCHO
(H min)
280 mm
300 mm
380 mm
470 mm
M an u a l d e us u ar io
NUMERO
FUERZA
REQUERIDA
DE TIROS
PARA
(nº)
LEVANTAR LA
CARGA
(kgf)
16-17 kgf
1
31-34 kgf
1
31-34 kgf
2
31-34 kgf
2
C
2 t - 3 t
DIÁMETRO
DE
CADENA
(mm)
6 mm
6 mm
6 mm
8 mm
3
Publicidad
