Safety Instructions - Ribimex Ribiland PREHLS52 Manual De Instrucciones

splitter.
Only use your hands to operate the control levers. Never use your foot, knee, a rope,
or any other extension device.
Always pay full attention to the movement of the wedge / log pusher ram.
Never attempt to load your log splitter while the ram is in motion.
Keep hands out of the way of all moving parts.
Never try to split two logs on top of each other. One of them may fly up and hit you.
Do not place any tool or any part of your body in the log splitter during operation.
Protect your hands
Keep hands out of moving parts. When the ram of the log splitter is in the return mode,
keep your hands off the machine - the log splitter is designed to automatically stop
when the cylinder is fully retracted.
Keep your hands away from splits and cracks which open in the log. They may close
suddenly and crush or amputate your hands.
Do not remove jammed logs with your hands.
Never leave tool running unattended
Do not leave the machine unattended when it is running.
Do not leave tool until machine has come to a complete stop and is unplugged.
Disconnect power
Attention! Disconnect product from power supply: before maintenance, cleaning,
making adjustments or changing parts or any intervention on product; before opening
motor cover; before moving product; or when not in use.
Consult manual before servicing.
Disconnect product from its main power source, if product, power cable, or extension
cord is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
Protect the environment
Take used oil to an authorized collection point or follow the legislation in the country
where the log splitter is used.
Do not discharge into drains, soil or water.
Do not discharge leftovers and/or remainders into drains.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre. Please contact your local
authority or local recycle centre for further information for its safe disposal.
III. SAFETY INSTRUCTIONS
Before using this product, carefully read this manual and familiarise yourself with its content and
understand all safety instructions.
Do not operate or service the product unless you clearly understand this manual.
Always follow the safety instructions to minimize risk of damage to property, and to minimize any
risk of damages and injuries to yourself and other persons and/or animals.
Keep the manual with the product or in a safe place, so that you can read it whenever you have a
question about its use or servicing.
3.1- General safety information
1. Keep work area clean
Cluttered areas invite accidents and injuries.
2. Consider work area environment
Do not expose product to rain or to humidity.
Do not use product in damp or wet locations, during weather conditions.