Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
28
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Description
1
Motor unit
2
Soft grip
3
Strap
4
Handle
5
Shaft tube
6
Cutting attachment
Specified Conditions Of Use
The power chain pruning saw has exclusively been
designed for pruning of trees and woody plants
from the ground - in private house gardens or hobby
gardens.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
It is necessary to comply with the regulations applicable
in the country where the truck is used.
Use the appliance only outside, never use it in
confined and bad ventilated areas.
Requirements for operating staff
The appliance may only be operated and maintained
by persons familiarised with it and informed about
possible risks.
Never let children work with the appliance. Never let
adults work with the appliance unless they have been
properly trained.
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Qualification: Apart from the detailed in-
structions by a professional, no special quali-
fication is necessary for appliance using.
Minimum age: Persons over 18 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Local regulations may stipulate the
minimum age of the user.
Training: Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
Residual risks
Danger of injury !
Contact with the saw chain can cause casualties.
Never touch moving chain by hands.
Always have your arms and legs in safe distance
from the cutting mechanism, in particular after
turning the engine on.
Danger of kickback !
Kickback can lead to casualties.
Danger of burns !
Some parts of the appliance get too hot when the
appliance is operated.
Contacting hot parts of the unit may cause burns.
Let the unit cool down after its operation is over.
Risk of poisoning!
Exhaust gases, fuel and lubricants are toxic. Inhaling
exhaust gases may be fatal!
Do not operate the unit in closed spaces where dan-
gerours carbon monoxide gases may accumulate.
Risk of explosion / Risk of fire!
Petrol and petrol vapours are highly flammable,
explosive.
Do not work with the unit in an environment with a
risk of explosion where there are flammable liquids,
gases or dust.
Never operate the unit near highly flammable
materials.
Even when the device is used properly and all safety
regulations are complied with, there still may be
some residual risks.
• Cutting injury
• Hearing damage
A longer stay in the immediate vicinity of the
running unit may cause hearing damage. Wear ear
protectors!
• Damage to health arising from vibrations to hand
and arms if the device is used for a long time or if
the device is not guided and evaluated properly.
Vibration damping systems are no guaranteed pro-
tection against white finger disease or carpal tunnel
syndrome. Therefore, it is necessary to carefully check
the state of your fingers and wrist if you have regular-
ly used the appliance for a long time. If any symptom
of the diseases above appears, seek medical advice
Publicidad
