Introduction; Drivers; Crossover; Amplifier - Phonic P5A Manual Del Usuario

INTRODUCTION

The bi-amplified P5A/6A/8A are two-way active
monitoring speakers designed for high output, low
coloration and broad bandwidth. P5A is 5" 2-way; P6A
is 61/4" 2-way, P8A is 83/4" 2-way. Bigger number
means bigger power as well as bigger woofer, which
offers extended low frequency response and higher
output level.
Due to its compact size, integrated construction,
excellent dispersion and precise stereo imaging,
ing, mobile vans, broadcast, TV control rooms and
home studios.
Designed as an active speaker, this unit contains
and protection circuitry. The directivity control system
used provides excellent frequency balance even in
4
All manuals and user guides at all-guides.com
-
SOFT DOME WITH SOUND GUIDING HORN
This horn is designed to provide better sound direc-
tivity for the listener(s). With its smooth surface and
well-spread angle, the sound produced from the
tweeter can be easily forwarded to the listener(s).

DRIVERS

The bass frequency is reproduced by a 5-inch, 61/4"-
inch, and 83/4" -inch woofer respectively. P5A, P6A,
and P8A all use a 25mm (1 inch) soft dome tweeter,
with pure piston behavior up to 20KHz. The uniform
dispersion control is achieved with the directivity con-
trol system. This has also resulted in perfect phase
and delay uniformity at thecrossover frequency. Both
drivers in PSeries Active Version are magnetically
shielded. Please feel free to place this unit next to
your PC, laptop, or any other electronic devices.

CROSSOVER

The active crossover network consists of two par-
complementary and the slopes are 24dB/ octave.
The crossover frequency is set to 1.8KHz. By use of
active crossover controls (Low Match, Room Com-
pensation, and High Match, which will be introduced
on page 6), this speaker may be exactly matched to
any application.
AMPLIFIERS
speaker with damping material, to ensure rattle free
operation and long term reliability. The unit incorpo-
rates special protection circuitry as well, for driver
protection. Variable input sensitivity allows for accu-
rate level matching to the mixing console.
P5A / P6A / P8A