Publicidad
Idiomas disponibles
Idiomas disponibles
7. Repeat Steps 1—6 to install the Passenger/right nerf bar.
8. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer
over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish.
Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap may be used also to clean the
nerf bars.
Remove plugs
Front
(Fig 1) Driver/left front mounting location
(Fig 3) Mounting Bracket illustration
Driver/left side Installation Pictured
(2) Hex Bolts
(2) Lock Washers
(2) Flat Washers
Page 2 of 3
4IN, 5IN & 6IN OVAL STRAIGHT
5IN OVAL CURVED NERF BAR
2019 SILVERADO/SIERRA 1500 DOUBLE CAB
(Fig 2) Remove plastic plugs to
uncover threaded inserts
(Fig 4) Driver/left front Bracket installed
Front
Publicidad
