Your ADE electronic baby scale is a quality product and manufactured for determining weight (up
to 20 kg) and optionally length (40 to 80 cm) of babies and toddlers, who cannot yet stand still on a
personal scale by themselves without assistance.
The scale may be used in health care environments for control purposes.
The maximum capacity of the scale is 20 kg. To achieve precise results, please read the user
guide carefully and follow the instructions contained therein. The scale may only be operated and
maintained by trained personnel.
The device may only be used as intended. All applications of the device not mentioned in the
chapter "Intended use" are considered as improper use. It is the user of the device, but not the
manufacturer, who assumes liability for any resulting damage to property or personal injury
resulting from misuse.
The use of accessories other than the original accessories supplied by the manufacturer may void
this warranty.
Warning:
This device may not be modified without the manufacturer's permission.
During use, do not touch the mains adapter/battery and the baby to be weighed at the
same time.
Do not use the device in an oxygen-rich environment.
A Class III calibrated scale must be used for medical, diagnostic and curative purposes.
2.1
General Safety Instructions
Be sure to read, understand and follow all instructions in this manual and others that accompany the
system and its components, as well as country-specific installation standards, applicable safety
regulations and accident prevention rules.
-
Handle the scale with care and always keep in mind that it is a precision measuring instrument.
-
Make sure that the baby to be weighed is centred on the weighing surface.
-
The scale may only be operated and maintained by trained and authorised skilled personnel.
-
Before first use, make sure that the mains voltage and current type stated on the name plate
match the mains voltage and current type at the place of use.
-
Never touch baby and mains adapter simultaneous.
-
Only the power adapters authorised by the manufacturer ADE may be used. Otherwise, there is
a risk that other electrical devices will be affected.
-
Only Bluetooth devices authorised by the manufacturer ADE may be connected. Otherwise,
there is a risk that the specified performance level will be compromised.
-
Anyone connecting additional equipment or power supply (other than specified in section 8) to
the equipment is responsible that the system complies with the requirements of the standard
IEC 60601-1.
-
The plug/adapter connector isolates the device from the mains supply. Do not place the device
in a position where it is difficult to disconnect the power supply to safely stop the operation of
the device.
-
Make sure that the mains cable is routed between the scale and the mains connection in such a
way that there is no risk of stumbling.
-
Make sure that the mains cable is routed between the scale and the mains connection in such a
way that there is no risk of strangulation.
Seite 22 von 112
1. Intended Use
2. Safety Instructions
M118600+M118600-01-210305-Rev002-UM-en