Connection of the steelyard rod to the long lever
Fig.4-1
1. Place the pillar on a table (Fig. 4).
2. Disassemble the transport wires of the levers.
3. Insert the wrench to the small hole in front of the steelyard rod and pull the steelyard rod
hock out.
4. Push the long lever up and hook the bearing of the steelyard rod over the pivot of the long
lever (Fig. 4-2).
5. Take the wrench off (Fig. 4-3).
6. Place the scale gently on the ground.
The connecting rod must move freely.
14
Fig. 4-2
Fig. 4-3
M318800-210628-Rev004-UM-de-e-fr-es