Descargar Imprimir esta página

Using The Programming Tool; Powering Up; Connecting The Programming Tool To The Control Panel - De Dietrich AD264 Manual Del Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 102

4 Using the programming tool

4.1 Powering up

When powering up the programming tool:
- The software version of the programming tool is displayed for 2
seconds.
This is not the correct version of the programme for the control
panel.
then:
- The version of the control panel programme loaded into the
programming tool is displayed.

4.2 Connecting the programming tool to the control panel

Switch off the control panel.
M3 control panel
Connect the programming tool to the control panel using the 14-pin
connection cable (delivered with the package).
16
Programming tool
09/12/2014 - 300011650-02

Publicidad

loading