Anjou AJ-PCA030 Guia Del Usuario página 6

3
1
3
5
7
3
2
2
Sec
4
6
60
Mins
8
Setting the Temperature ( Fig. 3 )
1. Plug the appliance into a wall outlet.
2. Press the Power Button for 0.5 seconds to turn on the appliance.
3. When the appliance is on, the LED display will blink three times first then show
the real-time temperature as the appliance heats up to the default temperature
setting (180 °C / 360 °F).
4. You can press the Temperature + Button to increase the temperature setting or
Temperature - Button to decrease the temperature setting from 80 °C - 220 °C /
180 °F - 430 °F with an increase / decrease of 10 °C / 10 °F by each press. The
LED display will blink three times to confirm your setting.
5. Press and hold the Power and Temperature + Buttons at the same time to change
the temperature display between Celsius and Fahrenheit settings. Once changed,
the temperature will turn to the default setting (180 °C / 360 °F).
6. This appliance comes with a 60-minute auto-shutoff function. It will power off
automatically after being used for 60 minutes to avoid overheating.
Caution
• Always place the heated iron on the barrel stand to prevent accidental burning of
the surface of your furniture (refer to diagram 7).
• Never leave the appliance unattended after connecting to power. Place it on
heat-resistant surface before cooling down (refer to diagram 8).
4