Reverb & Chorus - Gear4music SDP-2 Manual Del Usuario

REVERB & CHORUS
The in-built reverb and chorus effects can be added
to selected voices and the settings will be retained
even when the power is turned off/on.
Press the [REVERB] or [CHORUS] buttons as desired
to add the effect to the current voice. The selected
button will light up and the effect will be heard
when the piano is played. To turn off the effect,
press the button of the desired effect again and the
light will go out.
SELECT THE DEPTH OF THE EFFECTS
Press and hold the relevant effect button until the
button light flashes. You can then release the button
and press a key on the keyboard corresponding to
the setting you want for the reverb/chorus depth
(see the Parameter Adjusting Instructions appendix
for value ranges.) Multiple keys can be pressed
after each other until the right setting is found.
To exit the effect depth settings function, press the
relevant [REVERB] or [CHORUS] buttons again. Play
the piano to hear the new voice effects settings.
11