Restrictions On Use; Memory Cards; Upgrade Software; Software For Peripheral Equipment - Panasonic AK-HRP250G Manual De Usuario

Ocultar thumbs Ver también para AK-HRP250G:
Tabla de contenido

Publicidad

Restrictions on use

It is recommended that the remote operation panel and all devices to be used with the remote operation panel be connected to the same
network segment.
Events related to settings of network devices may occur if devices are connected to different segments, so verify operation carefully before
placing devices into service.

Memory cards

Memory cards used with the unit should conform to SDHC or SDXC standards.
Be sure to use the unit to format memory cards.
Memory cards with the following capacity can be used with the unit. MultiMediaCard (MMC) is not supported.
SDHC:
4 GB to 32 GB
SDXC:
64 GB
For the latest information not described in the Operating Instructions, refer to the following website.
https://pro-av.panasonic.net/
Observe the following points when using and storing this unit.
Avoid high temperature and humidity.
Avoid water droplets.
Avoid static electricity.

Upgrade software

You can obtain the upgrade software from Service and Support on the following website.
https://pro-av.panasonic.net/
For the upgrade procedure, refer to the instructions included with the download file.

Software for peripheral equipment

Software updates will also become necessary for the peripheral equipment that is connected to this unit (cameras or CCUs).
For details, consult your dealer.

File types handled by the unit

Scene file
Reference file
User file
Lens file
Connection configuration file
ROP configuration file
NOTE
For details on the data in the files (scene file, reference file, user file, and lens file) managed on the camera, refer to operating
instructions for the camera.
Data for creating the required image characteristics handled mainly by the video engineer.
This is managed on the camera.
Device setting data excluding operation data.
This is managed on the camera.
Device setting data retained by the camera.
This is managed on the camera.
Data to correct the lens specific characteristics handled by the video engineer.
This is managed on the camera.
Device setting data for connecting the unit and camera.
Unit specific setting data.
- 17 -
Introduction

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido