Front Panel 4 - Panasonic AK-HRP250G Manual De Usuario

Front panel 4

1 [TALLY/CALL] button
2 [IRIS/M.PED LOCK] button
3 [ALM] indicator
4 [EXT] indicator
5 [D.EXT] indicator
6 [OPT] indicator
7 [SENSE] dial
8 [COARSE] dial
9 [AUTO] button
10 [PANEL ACTIVE] button
11 [RELATIVE] button
12 [M.PED] dial
13 [IRIS] lever
14 [PREVIEW] button
15 Memory card access indicator
16 Memory card slot
1 2
6
3
4
5
15
16
9 10 11 8 7
Use this button to indicate tally information by the button lighting color (red or green).
When you press this button, the call switches on the camera and CCU light.
When the call switch is pressed on the camera or CCU, the switch lights and a buzzer sound is
output.
Short press this button to disable (lock) iris operation.
Long press this button to disable (lock) master pedestal operation.
This is the camera and CCU warning indicator lamp.
Consult your dealer if a failure occurs.
This indicator lights when the lens extender turns on.
This indicator lights when the digital extender turns on.
This is the camera cable warning indicator lamp.
Use this dial to adjust the iris variable range when the [IRIS] lever is moved from OPEN to
CLOSE.
Adjusts how much the iris is opened or closed when the [IRIS] lever is moved.
Use this button to enable the auto iris function. For details on the auto iris function, see the fol-
lowing page.
Use this button to lock (disable) the panel operation.
Use this button to set whether the variable range of the [IRIS] lever will be dependent on the
[SENSE] dial and [COARSE] dial.
Use this dial to adjust the master pedestal level.
Use this lever to adjust the iris level.
The iris can be adjusted manually.
Use this button to output a preview signal from the <PREVIEW> connector.
This indicator lights when data is read from or written to a memory card.
Insert a memory card into this slot. You can save the settings of the unit and the scene files,
user files, and other files to a memory card.
13
12
14
- 24 -
Parts and their functions