Setting The Clock; Auto Tuning; Preset Stations - Lenco TCD-974 Manual De Instrucciones

SETTING THE CLOCK

1. SET UNIT IN STANDBY MODE.
2. PRESS THE "MEM/CLK-ADJ" BUTTON (7), THE LCD DISPLAY (2) WILL SHOW "12HR24HR" AND
EITHER"12HR" OR "24HR" WILL FLASHING, PRESS SKIP
APPROPIATE AREA HOUR FORMAT(12HR/24HR). PRESS "MEM/CLK-ADJ" BUTTON (7) AGAIN TO
CONFIRM.
3. THE LCD (2) WILL FLASHINGTHE FIRST &SECOND DIGIT OF "00" OR "12". PRESS SKIP
BUTTON (17) TO SET THE CORRECT HOUR. PRESS"MEM/CLK-ADJ" BUTTON (7) TO STORE THE
CORRECT HOUR.
4. THEN THE THIRD & FOURTH DIGIT OF "00" IS FLASHING, PRESS THE SKIP
(17) TO SET THE CORRECT MINUTES. PRESS "MEM/CLK-ADJ" (7) TO STORE THE CORRECT MINUTE.
THE PRE-SET TIME WILL BE RE-SET COMPLETELY IF DIS-CONNECTING THE MAIN POWER SUPPLY. YOU

ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR CONVENIENCE USAGE.
THE CLOCK SET MODE WILL AUTOMATICALLY QUIT IF NO BUTTON IS BEING PRESSED IN A PERIOD OF

ABOUT 10 SECONDS AFTER PRESSING THE "MEM/CLK-ADJ" BUTTON (8).
LISTENING TO RADIO
MANUAL TUNING
1. PRESS THE POWER ON/STANDBY BUTTON (5) TO ORDER THE UNIT TO ON MODE.
2. PRESS FUNCTION BUTTON (4) TO SELECT "TUNER" MODE.
3. PRESS "BAND/STOP" BUTTON (13) TO SELECT DESIRED BAND (MW OR FM).
4. TUNE TO THE REQUIRED STATION BY PRESSING THE "TUNING/SKIPUP
5. ADJUST VOLUME KNOB (19) TO THE DESIRED VOLUME LEVEL.

AUTO TUNING

1. PRESS FUNCTION BUTTON (4) TO SELECT "TUNER" MODE
2. PRESS "BAND /STOP" BUTTON (13) TOSELECT THE DESIRED BAND (MW OR FM).
3. PRESS AND HOLD THE" SKIP / TUNING UP
THEN RELEASE
4. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO STATION IS REACHED.
5. REPEAT STEP 3 & 4 UNTIL THE DESIRED RADIO STATION IS BEING REACHED.
6. ADJUST VOLUME KNOB (19) TO THE DESIRED VOLUME LEVEL.

PRESET STATIONS

YOU CAN STORE UP TO TOTAL OF 50 RADIO STATIONS (30 FM,20 AM) IN THE MEMORY.
1. SET TO "TUNER" MODE
2. TURN TO THE DESIRED RADIO STATION BY "MANUAL" OR "AUTO" TUNING METHOD.
3. PRESS "MEM / CLK-ADJ" BUTTON (7) TO ENABLE PROGRAM STATE.
4. PRESS "FOLDER / PRE-UP (15) OR FOLDER / PRE-DOWN
SELECT THE DESIRED STATION MEMORY POSITION FOR STORAGE.
5. PRESS "MEM / CLK-ADJ" BUTTON (7) AGAIN TO CONFIRM THE SETTING.
6. REPEAT STEP 2 TO 5 TO STORE OTHER STATIONS.
7. PRESS "FOLDER / PRE-UP
PRESET STATIONS.
8. TO RETURN NORMAL TUNER MODE, LEAVE KEYS FREE.
THE PRE-SET MEMORIES WILL BE CANCELLED COMPLETELY IF THE MAIN POWER DISCONNECT TO

THE AC OUTLET. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
YOU CAN OVERWRITE A PRESENT STATION BY STORING ANOTHER FREQUENCY IN ITS PLACE.

FM & FM-STEREO RECEPTION
 PRESS THE "FM-ST/MONO" BUTTON (14) REPEATEDLY, THE FM PROGRAMS ARE RECEIVING IN MONO
AND STEREO MODE REPEATEDLY. IN PARTICULAR WHEN STEREO SIGNALS ARE WEAK. IT IS
PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
 IF STEREO SIGNAL IS BEING RECEIVED, THE "ST" INDICATOR "
(2) TO SHOW FM STEREO PROGRAM IS NOW RECEIVING.
OR DOWN
OR DOWN " BUTTON AT REMOTE HANDSET IN ORDER TO SELECT THE
GB- 2
ORSKIP BUTTON (17) TO SELECT THE
OR DOWN
BUTTON (17) FOR 1-2 SECONDS AND
" BUTTON (AT REMOTE HANDSET) TO
" WILL APPEAR ON LCD DISPLAY
OR SKIP
OR SKIP BUTTON
BUTTON (17).