Introduction; Features; Getting Started - Phonic ZA100 Manual Del Usuario

INTRODUCTION

Congratulations on your purchase of the ZA100
mixer amplifier from Echochang. The ZA100 offers
users with an easy and flexible solution to contractors
and engineers alike to easily incorporate a host of
possible sources into two zones. Output connection
is varied, allowing both ¼" phone jack and screw-
terminals to be used, depending on the application. A
USB playback module is on to allow incorporation of
MP3 or WAV files to the device.
Please take the time to read this manual thoroughly
before use. Inside you will find useful hints and safety
tips to ensure the unit is used correctly. Once read,
please store in an easy-to-find place so as to ensure
you can find it at a later date.

FEATURES

● 100 Watt (RMS) of power at 4 ohms, 100V
● 2 microphone, 1 line input channels through 1/4"
TRS phone jacks
● Built-in echo effect with Repeat and Speed parameters
● Screw terminal and 1/4" TS output connectors
● System EQ with treble and bass controls
● 6-segment LED VU meter on output
● Alert chimes and 'ding-dong' tone built-in
● Individual zone output select buttons
● Playback of MP3 or WAV files directly from USB
flash drives
● Stereo RCA tape in / line out connectors
● 2 standard rack units high
4
All manuals and user guides at all-guides.com

GETTING STARTED

1. Before turning the power on, the Master output
control should be set to -∞.
2. Always turn the power off before connecting or
disconnecting cables.
3. Check the AC outlet to ensure it is of a suitable
voltage before connecting the AC plug of this
device.
4. Do not obstruct the back panel due to the heatsink
and air vents needing ventilation.
5. Please ensure the distance between the back of
the ZA100 and the wall is over 1.5 feet to ensure
the device gets the ventilation which it needs.
ZA100