Kohler K-7437 Instrucciones De Montaje página 5

End Body
Rubber Washer
Gasket
End Body Outlet
O-Ring
Hose
Flexible Hose
Supply Tee
3. Supply Tee and Hose Installation
Insert the plastic gasket and the rubber washer into the supply
tee.
Thread the supply tee onto the spout shank until hand-tight.
Ensure that the arms of the supply tee are aligned to face the left
and right sides of the lavatory.
Thread a flexible hose onto each handle valve outlet. Securely
tighten the hose with a wrench. Do not overtighten.
Connect the flexible hoses to the supply tee. Do not use thread
sealant. To avoid kinking the hoses, loop them.
Securely tighten the hose with a wrench. Do not overtighten.
Kohler Co. 5 1006847-2-C