Operation; Maintenance And Care Instructions - monzana DBET001 Manual Del Usuario

For staples:
Insert the staples head down into the cartridge holder (2).
•
Press the reloading lever to completely close the cartridge holder.
•
Before loading the tacker, make sure that the unit is in the locked lock-on position and has been
disconnected from the power supply.
Never load staples and nails at the same time!
Checking the cassette handle
The display for the cartridge filling level (7) shows how many staples/nails are still in the cartridge
holder.

6.0 OPERATION

Using the Tacker
Test the tacker on a waste piece after each charge.
Press the lock-off switch (6) to unlock the tacker.
•
NOTE: The tacker will not operate if the lock-on switch (4) is pressed. This also applies when it is
connected to the mains.
NOTE: When not in use, press the lock-on switch to lock the tacker and disconnect it from the
power supply.
NOTE: Always store the tacker in the locked lock-on position (4).
Placing the tacker on the workpiece
Place the tacker where the staple or nail should be.
•
Press the tacker down firmly by pressing on the top of the machine (5) with one hand.
•
Operate the switch (3) with the other hand.
•
By pressing the machine down firmly, you increase safety during use.
•
Warning. The tacker's safety device is released when pressure is applied to the safety pin (8) on
the bottom of the machine. Always make sure that the mouthpiece of the tacker is in direct
contact with the material when the switch is pressed.
Stapling
Press the switch (3).
•
Due to its impact force, the tacker causes resistance. Be aware of this at all times. As a result, long
nails or staples can be inserted incorrectly. Applying counterpressure can prevent incorrect
insertion of staples or nails.

7.0 MAINTENANCE AND CARE INSTRUCTIONS

Always switch off the appliance and disconnect the mains plug before carrying out maintenance
or inspection work.
Check all the parts for signs of wear. Do not continue to use the product if you find any defects.
Only have parts replaced with original spare parts by a specialist in accordance with the
manufacturer's specifications. A lack of care and maintenance can damage the appliance.
Dangerous situations can arise. To ensure electrical safety, the appliance must not be treated
17 www.DEUBAXXL.de