Parts And Components; Before Use; Operation - cecotec Fun Gourmet Manual De Instrucciones

1. PARTS AND COMPONENTS

Fig. 1
Base
1.
2. Heating plate
3. Container
4. Temperature knob
5. Light indicator
6. Anti-splash lid
Forks
7.

2. BEFORE USE

Take the product out of the box.
Remove all packaging material
Make sure all parts and accessories are included, and check that they do not show any signs of
damage. If there are any, contact the official Technical Support Service of Cecotec.

3. OPERATION

Warning:
Make sure the knob is on the "0" position before plugging or unplugging the device.
A smell of smoke may come from the surface of the heating element when using this appliance
for the first time.
This appliance is designed to be used as a cheese fondue, oil fondue or chocolate fondue.
Place the heating base on a stable and heat-resistant table.
Place the fondue container on the heating base and make sure the base makes good contact
with the heating plate.
Introduce chocolate, cheese or oil in the fondue container. Do not exceed the maximum mark
inside the container.
Warning: Do not mix water and oil, it could be dangerous.
Plug the appliance into the main socket. Make sure the thermostat knob is set at the Min.
position before plugging it in.
Turn the knob to the Max. position, the heat light indicator will turn on and the device will start
operating.
The light indicator will turn on and on according to the automatic thermostat settings. This
way, the fondue container's temperature is controlled to ensure food is perfectly cooked.
Once you have finished using the device, turn the knob to the "0" position again, the light
indicator will turn off too.
ENGLISH
FUN GOURMET FONDUE
21