OKBABY Shark Manual De Instrucciones página 4

YOUR HELMET
EN
This helmet provides head protection whether
on or off the road. To ensure proper use of this
helmet, familiarise yourself with its features,
use and care by carefully reading this manual
before wearing it.
PROTECTION AND VENTILATION
The special outer shell makes this one of the
lightest helmets available at the same time
ensuring durability over time. The numerous
vents allow air to flow into the helmet to cool
your head.
ADJUSTMENT SYSTEM
You need to adjust the helmet before wearing
it. If you are unable to adjust the helmet to fit
you properly, DO NOT USE it and replace it with
one of a different size.
6
HOW TO USE THE ADJUSTMENT RING
Put on the helmet. Turn the ring clockwise
until the helmet fits tightly and comfortably.
To loosen the strap, TAKE OFF THE HELMET
and turn the ring anticlockwise. Make the
adjustment with the helmet fitting properly
on your head. If you do not adjust the helmet
properly, it may fall off should you fall or have
an accident. See Figure A for proper use of the
adjustment ring. See Figure F for the proper fit
of the helmet.
A
HELMET ADJUSTMENT
Retention system: This helmet uses a simple
retention system that can be buckled and
unbuckled without changing the adjustments
made. Place the helmet firmly on your head and
fasten the buckles by firmly pressing until you
hear a click. The straps must always be tight
but comfortable.
To tighten the rear strap, pull the excess part
of strap 2. Hold the helmet with one hand.
With the other hand, hold the strap that passes
under your chin. Then pull towards either side
to balance the length of all the straps (see
Figure B).
B
STRAP 1
STRAP 2
An O-ring is used to fasten the chin strap. Hold
the buckle with one hand and then pull the excess
strap (Figure C).
O-RING
C
If your helmet has a locking buckle, flip up the
lock, adjust the strap and then close the buckle
(Figure D).
If your helmet has a pushbutton buckle, adjust
the strap and then insert the clip to fasten it.
Press the button to release (Figure E).
Open
D
Close
The helmet must sit firmly and level on your
head. Lower the front of the helmet to cover
your forehead by tightening the chin strap
and loosening the rear strap. To uncover your
forehead, loosen the chin strap and tighten the
E
7