Krups AquaControl Instrucciones De Uso página 8

Switching on
Use the kettle always and only with the lid
on.
Mod. 845:
Plug the flex first into the appliance and
only then into the mains socket. (4)
Then switch on the appliance (5) which
will, when the water boils, switch off
automatically. (6)
Mod. 848:
Connect the base to the mains supply and
place the kettle on the base. (7)
Switch on the appliance. (5)
As soon as the water boils, the appliance
will switch itself off. (6)
The boiling operation can be interrupted at
any time by moving the switch to the 0
position.
Warning: Do not take off the lid during
the boiling process and always pull out
the mains plug after use.
Pouring out
Mod. 845: First pull out the mains plug and
then remove the flex from the
kettle.
Mod. 848: Remove the kettle from the base.
Pour out the water. (8)
Cleaning
Before starting the cleaning operation, first
pull out the mains plug and allow the
appliance to cool down. Wipe the outside
with a moist cloth and rinse it out inside.
Do not use any hard objects or scouring
materials for cleaning purposes.
8
All manuals and user guides at all-guides.com
Lime-scale removal
The kettle must have lime-scale removed
from time to time. Do this by putting so
much vinegar into the boiler, that the heating
element is completely covered. Allow this to
react overnight, but do not boil it.
Pour out the vinegar, wash out the boiler
several times with a great deal of water and
finally boil and pour away two fillings of
clean water.
Disposal
The packaging comprises exclusively
environmentally-friendly materials which
should be disposed of according to the local
recycling arrangements.
Disposal methods for the appliance itself
can be found by enquiry at the appropriate
department of the local authority.