Kunft KC3904 WH Manual De Instrucciones página 13

The manufacturer declines all responsibility if the above safety
precautions are not observed.
This appliance complies with the EEC Directives.
Reversing the door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexa-
gonal spanner.
• Please ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You
should rest the unit on something solid so that it will not slip during
the door reversing process.
• All parts removed must be saved to do the door's reinstallation.
• Do not lay the unit flat as this may damage the coolant system.
• It is advisable that 2 people handle the unit during assembly.
1. Remove all four screws in the top cover and
then lift it.
2. Unscrew the top hinge and then remove the
upper door, placing it on a soft pad to avoid
any scratches.
3. Remove the pin with a screwdriver and flip the
hinge bracket. Then refit the pin to the hinge
bracket.
4. unscrew the middle hinge. Then lift the lower
door and place it on a soft pad to avoid any
scratches.
5. Move the hinge hole covers from the left side
to the right side.
6. unscrew the bottom hinge.
Then remove the adjustable feet from both
sides.
Frigo-KC3904-Manual-2.indd 13
refrigerator combi
Note: remove this screw if it is present.
KC3904 WH
13
EN
unscrew
18/02/02 16:39