Bluetooth Operation; Problems And Solutions - Trevi SB 8380 SW Guia Del Usuario

ENGLISH
HDMI ARC IN
The HDMI ARC socket allows sound reproduction and joint control of the sound bar and the source device on some
basic functions (such as volume adjustment or mute function).
Check the complete list of available ARC functions in the manual of the source device.
1. Use an HDMI cable to connect the HDMI ARC input on the back of the sound bar to an HDMI ARC socket on your
TV or other source device.
2. Select the HDMI ARC input on the soundbar (ARC on the display);
3. The audio of the program being viewed on the source device will be played.
Note: The source device must have an ARC compatible HDMI socket; in some devices this function (if present)
must be activated from the menu. Check the HDMI ARC compatibility and available functions with the user manual
of the source device.

BLUETOOTH OPERATION

1. Turn on the device and select the BLUETOOTH function (BT flashing on the display);
2. The system will automatically go into pairing mode;
3. Activate the Bluetooth functionality on the external device to be paired;
4. Start searching for devices. At the end select the device "SB 8380 SW";
5. Enter the password "0000" if requested;
6. Press button (11) on the remote control or button (4) on the unit to start playback and buttons
(10) or (17) on the remote control or button (3) or (5) on the unit to select tracks.
PRE EQUALIZATIONS
The sound bar has a pre-set equalization system, press the EQ button (13) several times during playback to select
the audio dynamics that best suit the music style being played.
Press the 3D button (20) to have a surround effect.
HIGH and LOW TONE ADJUSTMENT
Treble tones can be adjusted using the TREBLE + (8) and TREBLE- (7) buttons on the remote control.
It is possible to adjust the bass tones using the BASS + (15) and BASS- (16) buttons on the remote control.

PROBLEMS AND SOLUTIONS

If your Sound bar does not work properly, check this short list before taking it to an authorized TREVI service center.
In any case, do not try to repair the device yourself, this would invalidate the warranty. Only TREVI technical assistance
centers are authorized to carry out interventions on this product.
No sound:
- Check that the MUTE function is not activated.
- Check that you have selected the correct input.
- Check and adjust the volume of the Sound Bar and TV (or connected device).
The Sound Bar does not turn on or turn off automatically:
- Check that you have correctly inserted the power cable.
- If the Sound Bar does not receive a signal for a certain time or has the Volume at 0 level, it will automatically
switch off (energy saving).
Problems with pairing with Bluetooth devices:
- If the sound quality is poor after Bluetooth pairing with an external device, please bring the external device closer
to the soundbar or remove any obstacles between them.
- If the connection between the soundbar and the device is not successful, check that the pairing function of the
device is enabled; refer to the device manual to enable the function.
14
SB 8380 SW