1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment and success.
Note:
According to the applicable product liability laws, the manufacturer of the device does not
assume liability for damages to the product or damages caused by the product that occurs
due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service technicians,
• Installation and replacement of non-original spare parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due to the non-compliance of the elec-
tric regulations and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating instructions before installing and commis-
sioning the device.
The operating instructions are intended to help the user to become familiar with the ma-
chine and take advantage of its application possibilities in accordance with the recom-
mendations. The operating instructions contain important information on how to operate
the machine safely, professionally and economically, how to avoid danger, costly repairs,
reduce downtimes and how to increase reliability and service life of the machine.
In addition to the safety regulations in the operating instructions, you have to meet the ap-
plicable regulations that apply for the operation of the machine in your country.
Keep the operating instructions package with the machine at all times and store it in a plas-
tic cover to protect it from dirt and moisture. Read the instruction manual each time before
operating the machine and carefully follow its information.
The machine can only be operated by persons who were instructed concerning the oper-
ation of the machine and who are informed about the associated dangers. The minimum
age requirement must be complied with.
GB | 25
www.scheppach.com