Scheppach AB1900 Traducción Del Manual De Instrucciones Origina página 30

• Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held
more secure than by hand.
• Wear a dust mask.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
WARNING
• Do not overreach. Keep proper footing and balance at all times.
• Use protective equipment. Always wear safety glasses when working with the machine.
The use of protective clothing is recommended, such as dust mask, protective gloves,
sturdy non-slip footwear and ear defenders.
• The dust produced when using this tool may be harmful to health. Do not inhale the
dust. Use a dust absorption system and wear a suitable dust protection mask. Remove
deposited dust thoroughly, e.g. with a vacuum cleaner.
• Always keep the connection cable from the working area of the device. Always guide
the cable backwards, away from the device!
• Do not machine any materials that present a danger to health (e.g. asbestos).
• When working in walls ceiling, or floor, take care to avoid electric cables and gas or
waterpipes.
• Please turn the device immediately off when the tool used gets blocked! Do not turn
the device on again when the tool is still blocked. This could cause bounce back with
a high reaction moment. Determine and remove the cause of the blocking of the tool
used while respecting the safety instructions.
The possible causes may be:
• it is tilted in the workpiece to be machined
• it has pierced through the material to be machined
• the power tool is overloaded
• Do not reach into the machine while it is running.
• Chips and splinters must not be removed while the machine is running.
WARNING! Danger of burns
The insertion tool may become hot during use.
• when changing tools
• when setting the device down
Warning! This electric tool generates an electromagnetic field during operation. This
field can impair active or passive medical implants under certain conditions. In order to
prevent the risk of serious or deadly injuries, we recommend that persons with medical
implants consult with their physician and the manufacturer of the medical implant prior to
operating the electric tool.
30 | GB
www.scheppach.com