Mellerware Fush! Guia De Inicio Rapido página 6

it with 1 glass (H). Take into account
that the water must not exceed the
mark indicated on the glass.
Screw on the safety cap.
–
Check that the safety cap is
–
perfectly screwed on and tightened
before connecting the appliance.
USE
Plug the appliance into the mains.
–
The red light will turn on. The
–
appliance is heating up.
When the green light comes on, the
–
appliance is ready to draw steam.
Always verify that the surfaces,
–
objects and fabrics to be treated are
resistant and or compatible with high
temperature steam. We recommend
that you check the manufacturer's
instructions and, before using the
equipment, perform a test on a
hidden part of the surface to be
treated or on a sample.
Do not tilt the appliance more than
–
45° during use, as boiling water
could escape along with the steam.
Caution: Accessories become
–
hot during use. Be careful when
removing them.
You can be burned if you touch hot
–
parts, hot water or steam emitted
by the appliance.
ACCESSORIES
CONICAL NOZZLE (N)
Insert the conical mouthpiece into
–
the accessory mouth by aligning
the tabs on the conical mouthpiece
with the holes in the mouth. Turn to
the right until it stops.
ROUND BRUSH (M) AND INCLINED
NOZZLE (K)
– Place these accessories on the
hose (P).
FLEXIBLE HOSE (P)
–
WINDOW AND FABRIC CLEANING
ACCESSORY (O, L)
–
windows, furniture, sofas, fabrics, etc.
The cloth (I) can be used to clean
–
delicate surfaces such as sofas
and armchairs.
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
Unplug the appliance from
–
the mains.
Let the appliance cool down.
–
Press the steam knob (D) to release
–
all the steam.
Do not force the safety cap to
–
open, make sure that the device is
completely depressurized before
opening it.
Unscrew the safety cap (B) slowly.
–
Remove the water from the tank.
–
Rinse the tank to remove the
–
accumulated calcareous remains.
Clean accessories and appliance.
–
NEVER immerse the main body (E)
–
in water.
EN