Product Description And Specifications; Technical Data - BTI A-S 12V Manual Original

OBJ_BUCH-2466-002.book Page 18 Thursday, September 7, 2017 4:30 PM
Product Description and
Specifications
Intended Use
The vacuum cleaner is intended for vacuuming dry
materials that are not harmful to one's health.
Use the vacuum cleaner only after
WARNING
having received sufficient infor-
mation on its usage. A thorough introduction re-
duces operating errors and injuries.
Product Features
The numbering of the product features refers to the
illustration of the vacuum cleaner on the graphics
page.
1 Release button for dust cup
2 On/Off button
3 Battery charge-control indicator
4 Handle
5 Battery pack*
6 Venting slots
7 Motor housing
8 Dust cup
9 Crevice nozzle
10 Intake port
11 Battery port
12 Battery unlocking button
13 Opening
14 Filter seal
15 Filter assembly
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Cordless dry vacuum cleaner
Art. No.
Container volume
Vacuum, max.
Airflow, max.
Weight according to
EPTA-Procedure
01:2014*
Permitted ambient
temperature
during charging
**
during operation and
during storage
* depending on the battery pack being used
** limited performance at temperatures <0 °C
18 | English
Cordless dry vacuum cleaner
Recommended batteries
Recommended chargers
* depending on the battery pack being used
** limited performance at temperatures <0 °C
Assembly
Battery Charging
 Use only the battery chargers listed on the ac-
Note: The battery supplied is partially charged. To
ensure full capacity of the battery, completely
charge the battery in the battery charger before us-
ing your power tool for the first time.
The lithium-ion battery can be charged at any time
without reducing its service life. Interrupting the
charging procedure does not damage the battery.
The lithium-ion battery is protected against deep
discharging by the "Electronic Cell Protection
(ECP)". When the battery is empty, the machine is
switched off by means of a protective circuit: The
inserted tool no longer rotates.
 After the automatic shut-off of the vacuum
Observe the notes for disposal.
Battery Charge-control Indication
The three green LEDs of the battery charge-control
indicator 3 show the charging status of the battery
5. The battery charge-control indicator only illumi-
nates for 3 seconds after start-up.
A-S 12V LED
9090217
Continuous lighting 3 x green ≥2/3
l 0.4 Continuous lighting 2 x green ≥1/3
hPa 45 Continuous lighting 1 x green <1/3
l/s 15
Flashing light 1 x green
When no LED lights up after switching on, then the
battery is defective and must be replaced.
kg 0.88–1.1
Battery Insertion/Removal (see figures A1 – A2)
 Do not use force to insert the battery. The bat-
°C 0...+45
°C –20...+50
cessories page. Only these battery chargers are
matched to the lithium-ion battery pack used in
your vacuum cleaner.
cleaner, do not continue to press the On/Off
button. The battery pack could become dam-
aged.
tery is designed in such a way that it can only be
inserted into the vacuum cleaner when it is in the
right position.
Slide the battery pack 5 all the way into the bat-
tery port 11.
A-S 12V
12V x.x Ah L-x
10.8V x.x Ah L-x
LG 12V L-x
LG 10.8V L-x
Capacity
Reserve
1 609 92A 44V • 7.9.17