Configuring Video Ports; Connection; Output Modes - Toshiba Thunderbolt 3 Dock Manual Del Usuario

Toshiba Thunderbolt™ 3 Dock

Configuring Video Ports

Connection

The dock provides the following video ports:
HDMI™ – for connection to HDMI™ (using the HDMI™ cable which is
not provided) interface monitors.
DisplayPort™ – for connection to DisplayPort™ (using the
DisplayPort™ cable which is not provided) interface monitors.
VGA monitor port – for connection to VGA (using the VGA cable which
is not provided) interface monitors.
Mini DisplayPort – for connection to Mini DisplayPort (using the Mini
DisplayPort cable which is not provided) interface monitors.
Upon connection, the video output ports on the dock become enabled
■
NOTE
and the video output ports on the computer become disabled.
When you disconnect the dock from the computer, the video output
ports on the computer are re-enabled automatically.
Connect the monitor cable (not provided) to the video output port on the
dock and the external monitor. This cable can be connected and
disconnected any time without disconnecting the dock from your computer.
You can customize the video settings of the dock. See
Settings

Output modes

The dock supports single/dual/triple output. Refer to the following table to
see detailed output modes and maximum resolution of each mode.
Output
Mode
Single
display
EN-22
section for more information.
Video 1
HDMI™ DisplayPort
output
port
3840x2160
@60Hz
- 3840x2160
@60Hz
-
-
-
VGA
- -
-
- 1920x1080
@60Hz
- - 3840x2160
@60Hz
- -
Adjusting Video
Video 2
Mini HDMI™
DisplayPort output
port
-
-
-
- 3840x2160
@30Hz
User's Manual
-
-
-
-