Hdmi1 Audio; Lip Sync Latency - Toshiba Regza AV50 Serie Manual Del Usuario

00GB_AV505D_EngOM.book Page 32 Saturday, November 24, 2007 5:53 PM
CONTROLS AND FEATURES

HDMI1 audio

If the connected HDMI source does not support digital audio,
plug the audio cable into HDMI1 (AUDIO) on the back of the
television (as shown in the 'Connecting an HDMI™ or DVI device
to the HDMI input' section), then use the HDMI1 audio
settings.
a
In the SET UP menu press
Q
highlighted, then press
SET UP
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back Watch TV
MENU EXIT
b
In the AV connection menu press
HDMI1 audio and using
Analogue.
AV connection
HDMI1 audio
Lip Sync
EXT2 input
MENU Back EXIT Watch TV
If the sound is missing select an alternative setting.
NOTE: HDMI1 supports digital and analogue sound,
HDMI2 is digital sound only.
Certain formats of DVD disk may not output from this
TV (32/44.1/48kHz and 16/20/24 bits are
acceptable).
u
until AV connection is
.
1/2
English
UK
OK
OK
OK
OK
u
to highlight
I i
or select Auto, Digital or
Digital
On
AV
32

Lip Sync Latency

Lip Sync can synchronize the sound and picture. This feature is
only available when equipment compatible with Lip Sync is
connected via HDMI.
a
In the AV connection menu press
Sync.
b
I i
Using or select On or Off.
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing,
LLC.
u
to highlight Lip