Wireless Headphone; Headphone Receivers; Operation; Battery Installation - Alpine TMX-310U Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39

Wireless Headphone

TMX-310U features integrated infrared (IR) transmitters on the front
of the overhead. The Overhead monitor transmits in Analog mode
on channel A and channel B. Digital mode is Channels 1 to 4. To
listen to the source displayed on monitor, turn on the analog or digital
headphone and ensure that they are set to channel A or B (analog),
Channel 1 to 4 (digital).
Usage of 1-Channel IR Headphones (analog):
The audio signal on headphone equals the selected Source displayed
on TMX-310U screen.
Usage of 2-Channel IR Headphones (analog):
The audio signal on headphone for Source (A) equals the selected
Source displayed on TMX-310U screen.
The audio signal on headphone for Source (B) equals the input signal
of AUX2 or Game Port.
Usage of 4-Channel IR Headphones (digital):
The audio signal on headphone for Sources (1) and (4) equals the
selected Source displayed on TMX-310U screen.
The audio signal on headphone for Source (2) equals the input signal
of AUX2 or Game Port.
The audio signal on headphone for Source (3) equals the input signal
of AUX1.
Analog and digital mode for IR Headphones can be selected in the
OSD menu.

Headphone Receivers

1) Infrared Sensors; Receive signal from the transmitter.
2) Battery Cover
3) Volume Control
4) Power Switch
5) Power Indicator LED
12
-EN

Operation

Read carefully to prevent damage to the headphone or
your ears:
WARNING: Before turning on the power, remove headphones and
turn the volume down as low as possible.
1) Be sure the batteries are properly installed in the
headphones.
2) Turn the headphones volume completely down before
placing it on your ears and turning on the power.
3) Turn on the headphone power and adjust the
headphone volume to a comfortable level (You can
increase the audio source volume if needed).

Battery Installation

Place two AAA batteries into the battery compartment of the
headphone(s), making sure that the battery polarity is correct.

Publicidad

Tabla de contenido
loading

Tabla de contenido