Tone Test; Function Key; Stenger Test - Interacoustics AD629 Manual De Instrucciones

Tone test

The Tone test screen is used for pure/warble tone audiometry via normal head phones or insert phones,
bone conduction, free field audiometry, multi frequency (optional test) as well as high frequency/high
frequency zoom (optional). When using Bone conduction, masking must be applied to obtain correct
results.

Function Key

10
11
12
13
14
15
16
17

Stenger Test

The Stenger test is a test when a patient is suspected of feigning/faking a hearing loss and is based on
the auditory phenomenon, "The Stenger Principle", that states that only the louder of two similar tones
presented to both ears at the same time will be perceived. As a general rule it has been recommended to
perform the Stenger test in case of unilateral hearing losses or significant asymmetries.
Please refer to the Tone Test section above for key function descriptions for Function Keys (7), (10), (11),
(12), (13), (14).
AD629 - Instructions for Use - EN
Description
Only available if High Frequency is available (optional license) on the AD629.
Selects the HF phone connected to the separate HF connectors.
Choose between HL, MCL and UCL by holding the Function Key (8) and
select the required measuring type by using one of the rotary wheels (41)/(43)
Not used in this test screen.
Switch between magnified top bar and normal sized top bar.
View the masking levels (dual audiogram mode only).
Multi frequency (optional MF license)
High Frequency (optional HF license)
High Frequency Zoom (optional HF license)
Page 15