Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
1. Fix the mounting bracket of the closing spring to the door frame with Ø 5 mm screws.
2. On normal weight doors usually on the lower part of the door.
3. The roller is then fixed to the door leaf.
Please, be sure to keep to the dimensions shown, especially the distance between roller and
mounting bracket.
Tensioning the closing spring
1. To tension the closing spring, insert the tensioning pin into one of the holes of the ring
2. Turn it towards the operating arm.
3. Insert the small bolt into the hole closest to the operating arm.
4. If the force is still not sufficient, repeat this procedure.
Questions?
We'll be happy to help! Just contact us!
4
Installation instructions - Closing spring Adjunkt D2A/D4
DICTATOR Technik GmbH · +49 (0)821 246730 · info@dictator.de · en.dictator.de
Publicidad
