How To Use For Z, Xz, Mz Indoor Unit - Panasonic CS-Z7SKEW Instrucciones De Funcionamiento

How to use
To optimise energy saving
ECONAVI
To select operation mode
MODE
AUTO mode - For your convenience
• During operation mode selection, the power
indicator will blinks at initial.
• Unit selects operation mode every 3 hours
Multi
according to setting temperature, outdoor
temperature and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power
indicator will blinks at initial during this operation.
COOL mode - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
To maximise comfort while
SLEEP
sleeping
(CANCEL)
• This operation provides you with a comfortable
environment while sleeping. It will automatically
adjust the sleep pattern temperature during the
activation period.
• The indoor unit indicator will dim when this
operation is activated. This is not applicable if the
indicator brightness has been manually dimmed.
• This operation is incorporated with the activation
timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with single
timer or twin timer. Sleep operation has the
priority over OFF timer.
• This operation can be cancelled by pressing the
respective button when the sleep timer reaches
0.0h.
To switch between powerful &
quiet
Remote control display
(
POWERFUL
QUIET
POWERFUL: To reach temperature quickly
• This operation stops automatically after
20 minutes.
QUIET: To enjoy quiet operation
• This operation reduces airfl ow noise.
8
All manuals and user guides at all-guides.com
For Z, XZ, MZ indoor unit
)
(NORMAL)
Human activity sensor
Remote control display
OFF/ON OFF/ON
MODE MILD DRY
TEMP TEMP
SLEEP
AIR SWING
FAN SPEED
ON ON SET SET
TIMER TIMER
OFF OFF CANCEL CANCEL
To select fan speed
FAN SPEED
Remote control display
(
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
Multi split system
Multi
Sunlight
sensor and
remote control
receiver
Indicator
(White)
POWER
(White)
TIMER
(White)
ECONAVI
(White)
nanoe
Press and hold for
approximately 10 seconds
to show temperature
setting in °C or °F.
Press and hold for
approximately 5 seconds
to show 12-hour (am/pm)
or 24-hour time indication.
Press to restore the
remote control to default
setting.
Not used in normal
operations.
)