Accessories
Hose
T-valve
Upevňovací sada
- balení obsahuje sadu pro skryté i klasické upevnění.
Rubber packing
Washer
Fixing bolt
(2 pcs)
(2 pcs)
(2 pcs)
Before instalation
•
Read the instructions carefully before installing.
•
Plug in only afret complete installation then supply water.
Installation Method
1) Separate water supply hose
•
Turn the water supply valve clockwise to
lock, and separate the toilet hose using
a spanner.
Toilet hose
Water supply
valve
104
Base bracket
Insert rubber
Fixing nut
Washer
Screw M/S
(2 pcs)
(2 pcs)
(2 pcs)
2) Remove the existing toilet seat
•
Unfasten the nut and remove the toilet
seat.
•
Save the old toilet seat lid and nuts for
reinstallation later.
3) Connect the T-valve to the toilet and
toilet hose
•
Place the T-valve between the toilet and
the toilet hose.
Bolt bracket
(2 pcs)
nut (2 pcs)
5) Install the bidet and secure the remote
control holder
•
Align the front of the bidet body and the
front of the toilet before fastening the nuts.
•
Slide the the bidet and install it.
•
Secure the remote control holder to the
wall with screws or peel off the double-si-
ded tape sticker on the back of the remote.
Back of the toilet
Rubber packing
Washer
Fixing nut
Operation Check
•
1. Turn the water supply valve counterclockwise to check for water leakage.
•
2. Connect the power plus into electrical outlet.
•
3. Pressing the Posterior button will make water flow into the water tank.
•
4. Check the functions for each type of use.
4) Install the base bracket
•
Place the fixing bolt on the base bracket.
•
Place the template on the toilet after
removing the toilet seat cover.
Fixing bolt
T-valve
Base bracket
Toilet hose
Water supply valve
6) Connect the hose and turn on the water
•
Connect the hose to the T-valve and the
bidet.
•
Turn the water supply valve countercloc-
kwise to allow water flow.
•
Connect the outlet.
Screw M/S
Washer
Insert rubber nut
Water supply
valve
Screw M/S
or
Filter
Hose
105