Rs-485/Network Set; Network Connections And Settings - Sanyo DSR-M810P Manual De Instrucciones

6

RS-485/NETWORK SET

This section describes how to make the RS-485 terminal
connections/settings needed to connect to an external
device, and how to make the network connections needed
to connect to a PC.

Network connections and settings

You can make digital video recorder menu settings and
monitor images from a PC via a network. To do so, connect
an LAN cable to the LAN terminal on the digital video
recorder's rear panel.
To connect a PC directly
(Do not use a switch.)
CCTV Camera
AUDIO
IN
To connect to an intranet
(Use a switch.)
CCTV Camera
AUDIO AUDIO LAN LAN
IN IN OUT OUT MIC IN MIC IN
A A
PC
PC
English
All manuals and user guides at all-guides.com
LAN VIDEO
IN
OUT MIC IN IN IN OUT
TV SYSTEM
NTSC
PAL
A
10
ALL
RESET
Cross-cable
PC
VIDEO VIDEO
IN IN IN IN OUT OUT
TV SYSTEM TV SYSTEM
NTSC NTSC
PAL PAL
ALL ALL
RESET RESET
Straight-cable
SWITCH
DVR DVR
DVR DVR
DVR DVR
Network connection via the Internet is not available.
You cannot use a router.
Settings for PC or network connection
When either the VA-SW81LITE or VA-SW814 remote
operation software is used, the IP address will be set
automatically by the PC. The following section describes
the method to be used when it is necessary to set an IP
address using the digital video recorder.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU>
screen appears.
2
Select "6.RS-485/NETWORK/REMOTE
SET" and press the [
The <RS-485/NETWORK/REMOTE SET> screen
appears.
(1)
(2)
Item Setting
IP Displays the IP address that has been set.
(1)
ADDRESS
ADVANCED Set whether to set IP address on digital video
(2)
SETTING recorder or on PC.
39
] button.
Description